Monitor Audio Integrated 225

With a few exceptions, features such as analog-only circuitry, a high-quality phono stage and balanced-line connections that contribute to better music reproduction and are typically found only in upscale stereo components. So it's refreshing that Anthem includes the features that audiophiles, music lovers and stereo enthusiasts look for when choosing a two-channel receiver or integrated amplifier.The Anthem Integrated 225 is an analog stereo integrated amplifier with 225 watts per channel, seven analog inputs, including a pair of balanced-line analog inputs, moving magnet phono input, CD and four AUX inputs with one front panel stereo input for a portable music player. Its features are geared for stereo listening and recording or custom installation applications, such as a zone amp for multiroom audio applications. Construction quality of the 225 is excellent. The front panel is fabricated from 3/8" thick aluminum and even the machine screws that fasten the steel cover to the chassis are flush with the surface. I removed the cover to have a look at the inside of the amp and all circuitry is neatly organized and logically laid out.The Integrated 225 amplifier is a Class A-B design with six bipolar devices per channel. Its generous power output of 225 watts per channel uses a torodial transformer backed by dual 30,000 micro-farad filter capacitors, which provides plenty of dynamic headroom and makes it well suited for a wide variety of loudspeakers, even those with a sensitivity spec well below 90dB.The Anthem amp uses analog circuitry throughout, even employing a motorized analog volume control that can be controlled manually, by remote control or via the RS-232 control interface for use with a system controller.The moving magnet phono stage uses active and passive equalization that, according to Anthem strictly follows RIAA standards and is designed to provide accurate, uncolored reproduction of vinyl recordings. High-output moving coil cartridges can also be used with the Integrated 225.The Anthem Integrated 225 comes with a universal learning remote control that can be programmed to operate other system components or can learn commands from other remote controls. The Anthem remote control is fully backlit enabling easy use in low light. Macro commands can be programmed into the Anthem remote control to execute multiple functions, such as amp power, cable box, TV power and so on. A total of 32 commands can be programmed into the macro function! The phono preamplifier is suitable for moving magnet and high-output moving coil cartrdiges Input Impedance 47 kohm Input Capacitance 100 pF Maximum Input 18 mV at 20 Hz, 140 mV at 1 kHz, 160mV at 20 kHz Gain (at 1 kHz) 35 dB Crosstalk (at 1 kHz) 80 dB RIAA Response +/- 0.5 dB (100 Hz to 20 kHz); -1 dB (20 Hz) THD+N (at 1 kHz, 5 mV input) 0.05% S/N Ratio (ref. 5 mV at 1 kHz, IEC-A filter) 83 dB PREAMPLIFIER Input Impedance 30 kohm 'Pre-Out' Output Impedance 560 ohm 'Rec-Out' Output Impedance 100 ohm Rated Input 1.0 Vrms Maximum Input 7.6 Vrms Minimum Load 5 kohm Rated Output (100 kohm load) 1.0 Vrms Maximum Output (100 kohm load) 7.6 Vrms Headphone Output 500 mW into 32 ohm at 0.03% THD+N Channel Separation (at 1 kHz) 75 dB Crosstalk Between Inputs (at 1 kHz) 72 dB
Azi 7.990 LEI
Cumpără la cel mai bun preț de la magazinele de mai jos sau caută alte produse:
Cere părerea prietenilor tăi:
Nu sunt oferte recomandate